Scania Super P420-B6X4: High-Powered 41-Ton Coal Hauling Truck

06 February 2026

Answering the Call of the Mining Industry

Indonesia’s coal mining industry is a dynamic sector that demands the highest levels of performance, efficiency, and reliability. Amidst increasingly tough operational challenges, from difficult terrain to stringent production targets, the need for a robust hauling fleet is crucial. Every hour of downtime is a loss, and every litre of fuel is a cost that must be accounted for. To answer this challenge, mining business players need more than just a truck; they need a reliable partner to maintain operational fluency and maximize profitability.

United Tractors, as a trusted partner in the heavy equipment industry, fully understands this need. We therefore present the Scania Super P420-B6X4, a coal hauling truck specifically designed to dominate mining operations. With a combination of massive engine power, large payload capacity, and Scania’s leading-edge technology, this truck is not merely a transport vehicle, but a comprehensive solution to enhance productivity and efficiency at your mine site. Let’s dive deeper into why the Scania Super P420-B6X4 is the right choice for your business.

Main Specifications of the Scania P410-B6X4: Power That Translates to Profit

Behind the superior performance of the Scania Super P420-B6X4 lie technical specifications engineered to deliver both power and efficiency simultaneously. These figures are not just data; they are the foundation of productivity in the field.

Engine Power: The heart of this truck is a powerful 420 horsepower (HP) engine. This immense strength ensures the truck can conquer steep inclines on mine roads without losing momentum, even when fully loaded. More power means shorter cycle times, allowing for more trips per day.
Peak Torque: Torque is the initial force required to move a heavy load from a standstill. With a peak torque of 2.300 Nm at low engine speeds, the Scania Super P420-B6X4 has outstanding pulling power to start moving on soft or muddy ground, reducing strain on the engine and transmission.
Payload Capacity: With a Gross Vehicle Weight (GVW) of 41 tons, this truck is designed to maximize the payload on every trip. This large capacity directly enhances operational efficiency by reducing the number of journeys needed to move a specific amount of material.
Drive Configuration: The 6×4 configuration (tandem drive axle) provides superior traction and stability on the uneven and slippery surfaces commonly found in mining areas. This system ensures that engine power is effectively transferred to the wheels, delivering maximum grip for safety and performance in all weather conditions.

This combination of specifications creates a machine that is not only powerful but also intelligent. Every component works in synergy to ensure that every drop of fuel is converted into productive hauling power.

Operational Excellence: Next-Level Productivity and Efficiency

The Scania Super P420-B6X4 is engineered to provide a competitive edge through tangible operational efficiency. This advantage is realized through several key pillars that directly impact your business’s profitability.

Maximum Productivity on Every Trip: Time is money in the mining industry. Thanks to its 420 HP engine and 2.300 Nm of torque, the Scania Super P420-B6X4 can maintain a higher average speed along the haul route. This cuts down the time per cycle (loading, hauling, dumping, and returning), thereby significantly increasing the amount of coal that can be transported in a single work shift.
Superior Fuel Efficiency: Fuel cost is one of the largest operational expenses. Scania is renowned for its efficient engine technology, including the use of advanced Selective Catalytic Reduction (SCR). This technology optimizes the combustion process to produce maximum power with minimal fuel consumption, while also reducing exhaust emissions. Coupled with the aerodynamic design of the P-series cab, this truck helps you significantly lower operational costs.
Proven Toughness and Reliability: Built on a robust chassis and a suspension system designed for heavy-duty terrain, the Scania Super P420-B6X4 offers exceptional durability and reliability. This truck is ready to work hard in long and demanding work cycles, minimizing the risk of breakdowns and unexpected downtime. This reliability ensures your fleet is always ready to operate and production targets are met.

Operator Comfort: The Core Asset for Peak Performance

United Tractors and Scania understand that the operator is the most valuable asset in any hauling operation. A fatigued and uncomfortable operator will experience a decline in focus and productivity. Therefore, the Scania P-series cab is designed with a “humanistic” approach, prioritizing operator comfort and safety.

Superior Visibility for Maximum Safety: The P-series cab design provides an expansive view in all directions. The operator’s high seating position, large glass areas, and slim pillars help to minimize blind spots. Excellent visibility is crucial for maneuvering safely in busy mine sites, reducing accident risks and boosting operator confidence.
World-Class Ergonomics for Sustained Focus: Every element inside the cab, from the adjustable steering wheel and easily accessible instrument panel to the optimally supportive seat, is ergonomically designed. A quiet working environment with minimal vibrations helps reduce operator physical and mental fatigue, allowing them to remain alert and focused during long shifts. A comfortable operator is a productive and safe operator.
A Supportive Work Environment: The Scania P-series cab offers more than just a seat. With easy entry and exit, smart storage compartments for personal belongings and work gear, and an efficient air conditioning system, the cab becomes a comfortable and supportive workspace. This positive environment contributes to overall operator morale and performance.

Industry Application: Purpose-Built for Coal Mining

With all its advantages, the Scania Super P420-B6X4 is the precise answer to the specific needs of the coal mining industry. Its immense power is ideal for hauling heavy loads across challenging mine geography. Its fuel efficiency helps manage costs amidst commodity price uncertainty. Its reliability ensures operational continuity, while its operator-centric cab keeps your most important asset safe and productive. This truck is a strategic investment to enhance the competitiveness and long-term success of your mining business.

Begin Your Strategic Partnership with United Tractors

Choosing the Scania Super P420-B6X4 from United Tractors is more than just a purchase; it is the beginning of a strategic partnership. We not only provide world-class products but also a commitment to comprehensive after-sales service, including guaranteed spare parts availability and technical support from reliable mechanics across Indonesia. We are ready to ensure your investment yields maximum returns.

Elevate the productivity and efficiency of your mining operations to the next level. Contact UT Call at 1500 072 for a product consultation and discover how the Scania Super P420-B6X4 can become the backbone of your business’s success.